Luresaver: the Intelligent Snap Ring

Dramatically reduce the cost of your bait! Fishing without fear of trailers where the fish is!

Lightning Hook Exchange – Without Tools!

How often have you avoided a fishing-waters section, because they feared to lose their favorite bait here? How many (big) fish have you not caught so? How much money have you parked at the bottom now?An age-old problem: how will save his favorite lure, which forever hang apparently remained one is because all usual rescue attempts failed?That’s now! For now, there is the

Ultimate Niti Luresaver

Simple and fast mounting · Super lightweight · Stainless steel (material titanium alloy) · Memory effect (always returns to the original form) to solve even the most stubborn hangers!

THE principle: The LURESAVER is produced with a predefined force. Then the LURESAVER if this limit is exceeded at a trailer, releases the fixed hook and the bait is again available. The ring returns to the stretching and opening up in its original form (memory metal). The Clou: Used correctly you can not reach the necessary tensile force with a fishing rod accessory. On the contrary: the rod reduces the linear tensile forces and acts as a buffer. Therefore, also not so big fish by unintentional triggering of the mechanism is lost.

So do it right: 1. Select a on the capacity of the fishing line of matched LURESAVER according to the color code on the packaging and the rings. 2. replace the original snap rings with LURESAVER. The narrow end must point towards bait. 3. in the case of a trailer, you access the fishing line above the tip of the tail. Caution: With braided lines use necessarily Lösestock or similar object. Exert a uniformly increasing tension on the bait stuck. Avoid sudden tearing. If you are using enough force, the LURESAVER releases fixed hook. Package contents 6 rings size color code size range: strings with a loading capacity up to receiver. VP euro LureSaver-06 small orange 6 lb (2.7 kg) 10.95 LureSaver 08 small light blue 8 lb (3.6 kg) 11.50 LureSaver-10 small green 10 lb (4.54 kg) 11.95 LureSaver-06 big orange 6 lb (2.7 kg) 12.95 LureSaver-08 big blue 8 lb (3.6 kg) 13.50 LureSaver-10 green 10 lb (4.54 kg) 13.95 LureSaver-12 big silver 12 lb (5.4 kg) 14.50 LureSaver-15 big red 15 lb (6.8 kg) 14.95 LureSaver 20 great white 20 lb (9.1 kg) 15.95 LureSaver-30 big yellow 30 lb (13.6 kg) 16.50

Important notes: The inserted LURESAVER must correspond to the load-bearing capacity of the fishing line (see table). Rod and cord must be co-ordinated. No cord with a very low capacity to a very stiff rod. Nonsensical combinations like for example the use a 3.6 kg cord on a heavy (= stiff) spinning, Pilk-or Jerkbait endanger the proper functioning of the lure avers. Of heavy rods are thicker lines and correspondingly resilient Luresaver.

The LURESAVER is designed to return again and again in its original form and can be used therefore zillion times. We recommend after several hard operations to carry out an Exchange.

Attention big fish hunters! The possible range is doubled through use of two LureSavern per hook (of course side by side mounted). Example: Two LureSaver of size 30 match a cord with 27.2 kg lifting capacity.

Leave a Reply